Static Routes - Motorola AP-6511 Reference Manual

4. Set the following parameters for IP DSCP mappings for untagged frames:
DSCP
802.1p Priority
5. Use the spinner controls within the
6. Select the OK button located at the bottom right of the screen to save the changes. Select
to the last saved configuration.

7.3.4 Static Routes


Profile Network Configuration
Use the Static Routes
IP addresses for requesting clients without creating numerous host pools with manual bindings. This
eliminates the need for a long configuration file and reduces the resource space required to maintain address
pools.
To create static routes:
1. Select Configuration
2. Expand the Network menu to display its submenu options.
3. Select Static Routes.
Lists the DSCP value as a 6-bit parameter in the header of every IP packet used
for packet classification.
Assign a 802.1p priority as a 3-bit IP precedence value in the Type of Service
field of the IP header used to set the priority. The valid values for this field are
0-7. Up to 64 entries are permitted. The priority values are:
0 – Best Effort
1 – Background
2 – Spare
3 – Excellent Effort
4 – Controlled Load
5 – Video
6 – Voice
7 – Network Control
802.1p Priority
screen to set Destination IP and Gateway addresses enabling assignment of static
> Profiles > Network.
field for each DSCP row to change its priority value.
Profile Configuration
Reset to revert
7-29