Motorola AP-6511 Reference Manual page 74

Motorola Solutions AP-6511 Access Point System Reference Guide
required by the certificate authority, and the certificate authority maintains the right to contact the applicant
for additional information.
If the request is successful, the CA sends an identity certificate digitally signed with the private key of the
CA.
To create a CSR:
1. Select the
parameters (within the Certificate Management screen).
2. Select
3. Define the following configuration parameters required to
(CSR):
Use an Existing RSA
Key
Create a New RSA
Key
5-22
Launch Manager button from either the SSH RSA Key or RADIUS Server Certificate
Create CSR from the upper, left-hand, side of the Certificate Management screen.
Figure 5-14 Certificate Management - Create CSR screen
Select the radio button and use the drop-down menu to select the existing key
used by both the device and the server (or repository) of the target RSA key.
To create a new RSA key, select the radio button to define a 32 character name
used to identify the RSA key. Use the spinner control to set the size of the key
(between 1,024 - 2,048 bits). Motorola Solutions recommends leaving this
value at the default setting (1024) to ensure optimum functionality. For more
information on creating a new RSA key, see
Create New Certificate Signing Request
RSA Key Management on page 5-15
.