Motorola AP-6511 Reference Manual page 398

Motorola Solutions AP-6511 Access Point System Reference Guide
The
Name
Interface MAC
Address
IP Address
IP Address Type
Hardware Type
Index
Access VLAN
Access Setting
Administrative
Status
The
Media Type
Protocol
MTU
Mode
Metric
Maximum Speed
Admin. Speed
Operator Speed
Admin. Duplex
Setting
Current Duplex
Setting
13-38
General field describes the following:
Displays the name of the interface.
Displays the MAC address of the interface.
IP address of the interface.
Lists the IP address type of the interface
Displays the hardware type.
Displays the unique numerical identifier supporting the interface.
Displays the interface the VLAN has access to.
Displays the mode of the VLAN—Access or Trunk.
Displays whether the interface is currently UP or DOWN.
Specification field displays the following:
Displays the physical connection type of the interface.
Medium types are:
Copper - Used on RJ-45 Ethernet ports
Optical - Used on fibre optic gigabit Ethernet ports
Displays the name of the routing protocol adopted by the interface.
Displays the maximum transmission unit (MTU) setting configured on the
interface. The MTU value represents the largest packet size that can be sent
over a link. 10/100 Ethernet ports have a maximum setting of 1500.
The mode can be either:
Access – This Ethernet interface accepts packets only from the native VLANs.
Trunk – This Ethernet interface allows packets from a given list of VLANs that
you can add to the trunk.
Displays the metric value associated with the route through this interface.
Displays the maximum speed at which the interface transmits or receives
data.
Displays the speed setting used when using the administrative interface.
Displays the current speed of the data transmitted and received over the
interface.
Displays the administrator's duplex setting.
Displays the interface as either half duplex, full duplex, or unknown.