Motorola AP-6511 Reference Manual page 78

Motorola Solutions AP-6511 Access Point System Reference Guide
8. Select the
the
For an overview of Smart RF and instructions on how to create a Smart RF policy that can be used with
a RF Domain, see
9. Use the
The AP-6511 supports Wireless Intrusion Protection System (WIPS) to provide continuous protection
against wireless threats and act as an additional layer of security complementing wireless VPNs and
encryption and authentication policies. The AP-6511 supports WIPS through the use of dedicated sensor
devices designed to actively detect and locate unauthorized AP devices. After detection, they use
mitigation techniques to block the devices by manual termination, air lockdown, or port suppression.
10.Select the
Edit
For an overview of WIPS and instructions on how to create a WIPS policy that can be used with a RF
Domain, see
11.Refer to the
Window Index
Sample Interval
Window Size
12.Select
reverts the screen to its last saved configuration.
5-26
Create icon to define a new Smart RF policy that can be applied to the RF Domain or select
Edit icon to modify or override an existing Smart RF policy.
Smart RF Policy on page
WIPS Policy drop down menu to apply a WIPS policy to the RF Domain.
Create icon to define a new WIPS policy that can be applied to the RF Domain or select the
icon to modify or override an existing WIPS policy.
Intrusion Prevention on page
Statistics field to set the following data:
Use the spinner control to set a numerical index used as an identifier for each
RF Domain statistics configuration defined.
Use the spinner control to define the interval (in seconds) used to capture
statistics supporting the listed RF Domain configuration. The default is 5
seconds.
Use the spinner control to set the number of samples used to define RF Domain
statistics. The default value is 3 samples.
OK to save the changes and overrides made to the RF Domain configuration. Selecting
6-55.
8-13.
Reset