Motorola AP-6511 Reference Manual page 191

Figure 6-25 Smart RF Basic Configuration screen
4. Refer to the Basic Settings
status.
Sensitivity Select a radio button corresponding to the desired Smart RF sensitivity.
Options include Low, Medium, High and Custom. Medium, is the default
setting. Select the Custom sensitivity option to enable the Interference
Recovery, Coverage Hole Recovery and Neighbor Recovery options as
additional Smart RF recovery options.
SMART RF Policy Select the
Enable policy for immediate inclusion with a RF Domain. Smart RF is disabled by
default.
Auto Assign Sensor Select the radio button to enable an AP-651 to auto assign a sensor radio
for neighbor activity monitoring within the AP-6511 Smart RF supported
network.
Interference Select the radio button to enable Interference Recovery when radio
Recovery interference is detected within the Smart RF supported AP-6511 radio
coverage area. When interference is detected, Smart RF first determines
the power increase needed based on the signal to noise ratio for a client
as seen by the Access Point radio. If a client's signal to noise value is above
the threshold, the transmit power is increased until the signal to noise rate
falls below the threshold.
field to enable a Smart RF policy and define its sensitivity and detector
Smart RF Policy Enable radio button to enable this Smart RF
Wireless Configuration
6-57