Forwarding Database - Motorola AP-6511 Reference Manual

Motorola Solutions AP-6511 Access Point System Reference Guide
4. Select
5. Add IP addresses and network masks in the
6. Provide the
7. Select the
to the last saved configuration.

7.3.5 Forwarding Database


Profile Network Configuration
A Forwarding Database is used by a bridge to forward or filter packets. The bridge reads the packet's
destination MAC address and decides to either forward the packet or drop (filter) it. If it is determined the
destination MAC is on a different network segment, it forwards the packet to the segment. If the destination
MAC is on the same network segment, the packet is dropped (filtered). As nodes transmit packets through
the bridge, the bridge updates its forwarding database with known MAC addresses and their locations on
the network. This information is then used to decide to filter or forward the packet.
To define a forwarding database configuration:
1. Select
2. Expand the Network menu to display its submenu options.
3. Select
7-30
Figure 7-16 Static Routes screen
Add Row + as needed to include single rows in the static routes table.
Gateway used to route traffic.
OK button located at the bottom right of the screen to save the changes. Select
Configuration > Profiles
Forwarding Database.
Network column.
> Network.
Reset to revert