Profile Management Configuration And Deployment Considerations - Motorola AP-6511 Reference Manual

13.Use the parameters within the
automatic firmware configuration.
Enable Controller
Upgrade of AP Firmware
Number of Concurrent
Upgrades.
14.Select OK to save the changes made to the profile's Management Firmware configuration. Select
to revert to the last saved configuration.
15.Select the Heartbeat
16.Select the Service Watchdog
devices are up and running. The Service Watchdog is enabled by default.
17.Select OK to save the changes made to the profile maintenance Heartbeat tab. Select
to the last saved configuration.

7.6.1 Profile Management Configuration and Deployment Considerations


Profile Management Configuration
Before defining a profile's management configuration, refer to the following deployment guidelines to ensure
the profile configuration is optimally effective:
Automatic Adopted AP Firmware Upgrade
Select this option to enable adopted Access Point radios to upgrade to a
newer firmware version using its associated controller's most recent
firmware file for that AP model. This parameter is disabled by default.
Use the spinner control to define the maximum number (1 - 20) of adopted
APs that can receive a firmware upgrade at the same time. Keep in mind
that, during a firmware upgrade, the AP is offline and unable to perform its
normal wireless client support function until the upgrade process is
complete.
option from the Management menu.
Figure 7-32 Profile Management Heartbeat screen
option to implement heartbeat messages to ensure other associated
Profile Configuration
field to define an
Reset
Reset to revert
7-53