Motorola AP-6511 Reference Manual page 60

Motorola Solutions AP-6511 Access Point System Reference Guide
4. Define the following configuration parameters required for the
Trustpoint Name
Key Passphrase
URL
Protocol
Port
IP Address
5-8
Figure 5-4 Certificate Management - Import New Trustpoint screen
Enter the 32 character maximum name assigned to the target trustpoint. The
trustpoint signing the certificate can be a certificate authority, corporation or
individual.
Define the key used by both the device and the server (or repository) of the
target trustpoint. Select the
used in the key. Leaving the Show checkbox unselected displays the
passphrase as a series of asterisks "*".
Provide the complete URL to the location of the trustpoint. If needed, select
Advanced to expand the dialog to display network address information to the
location of the target trustpoint. The number of additional fields that populate
the screen is also dependent on the selected protocol.
Select the protocol used for importing the target trustpoint. Available options
include:
tftp
ftp
sftp
http
cf
usb1
usb2
Use the spinner control to set the port. This option is not valid for cf, usb1, and
usb2.
Enter IP address of the server used to import the trustpoint. This option is not
valid for cf, usb1, and usb2.
Import of the trustpoint.
Show textbox to expose the actual characters