Motorola AP-6511 Reference Manual page 105

Figure 5-29 Profile Overrides - Network QoS screen
6. Set or override the following parameters for the IP DSCP mappings for untagged frames:
DSCP
802.1p Priority
7. Use the spinner controls within the
priority value.
8. Select the OK button located to save the changes and overrides. Select
configuration.
Lists the DSCP value as a 6-bit parameter in the header of every IP packet used
for packet classification.
Assign a 802.1p priority as a 3-bit IP precedence value in the Type of Service
field of the IP header used to set the priority. The valid values for this field are
0-7. Up to 64 entries are permitted. The priority values are:
0 – Best Effort
1 – Background
2 – Spare
3 – Excellent Effort
4 – Controlled Load
5 – Video
6 – Voice
7 – Network Control
802.1p Priority field for each DSCP row to change or override the
Reset to revert to the last saved
Device Configuration
5-53