Motorola AP-6511 Reference Manual page 132

Motorola Solutions AP-6511 Access Point System Reference Guide
10.Select the
Update
the device.
If enabled (the setting is disabled by default), provide a complete path to the target configuration file
used in the update.
11.Refer to the
profile to update device firmware.
Enable Firmware
Upgrade
12.Use the parameters within the
automatic firmware upgrade from a local file.
Enable Controller
Upgrade of AP Firmware
Number of Concurrent
Upgrades.
13.Select
Select
5-80
Figure 5-46 Profile Overrides - Management Firmware screen
Enable Configuration Update
field) to enable automatic configuration file updates for the profile from a location external to
Automatic Firmware Upgrade
Select this option to enable automatic firmware upgrades (for this profile)
from a user defined remote location. This value is disabled by default.
Automatic Adopted AP Firmware Upgrade
Select this radio button to enable adopted Access Point radios to upgrade
to a newer firmware version using a resident firmware file for that AP
model. This parameter is disabled by default.
Use the spinner control to define the maximum number (1 - 20) of adopted
APs that can receive a firmware upgrade at the same time. Keep in mind
that during a firmware upgrade, the AP is offline and unable to perform its
normal wireless client support function until the upgrade process is
complete.
OK to save the changes and overrides made to the profile's Management Firmware configuration.
Reset to revert to the last saved configuration.
radio button (from within the
field to define or override the configuration used by the
Automatic Configuration
field to define an