Motorola AP-6511 Reference Manual page 125

NAT IP Enter the IP address of the matching packet to the specified value. The IP
address modified can be either source or destination based on the
direction specified.
NAT Port Enter the port number of the matching packet to the specified value. This
option is valid only if the direction specified is destination.
Network Select
default setting.
12.Select OK to save the changes or overrides made to the static NAT configuration. Select
to the last saved configuration.
13.Select the Dynamic NAT
Dynamic NAT configurations translate the IP address of packets going out from one interface to another
interface based on configured conditions. Dynamic NAT requires packets be switched through a NAT
router to generate translations in the translation table.
Figure 5-42 Profile Overrides - Dynamic NAT screen
Inside or Outside NAT as the network direction. Inside is the
tab.
Device Configuration
Reset to revert
5-73