Configuring A Wlan's Qos Wireless Client Rate Limit Settings - Motorola AP-6511 Reference Manual

Motorola Solutions AP-6511 Access Point System Reference Guide
6. Set the following
category. An early random drop is done when the amount of tokens for a traffic stream falls below the
set threshold.
Background Traffic
Best Effort Traffic
Video Traffic
Voice Traffic
7. Select
screen back to its last saved configuration.

6.2.3 Configuring a WLAN's QoS Wireless Client Rate Limit Settings

Wireless clients can also have QoS rate limit settings defined in both the upstream and downstream
direction.
To configure a QoS rate limit configuration for wireless clients:
1. Select
WLANs.
2. Either select the
and select
3. Select the
6-44
Downstream Random Early Detection Threshold
Set a percentage value for background traffic in the downstream direction.
This is a percentage of the maximum burst size for low priority traffic.
Background traffic exceeding the defined threshold is dropped and a log
message is generated. Background traffic consumes the least bandwidth
of any access category, so this value can be set to a lower value once a
general downstream rate is known by the network administrator (using a
time trend analysis). The default threshold is 50%.
Set a percentage value for best effort traffic in the downstream direction.
This is a percentage of the maximum burst size for normal traffic. Best
effort traffic exceeding the defined threshold is dropped and a log message
is generated. Best effort traffic consumes little bandwidth, so this value
can be set to a lower value once a general downstream rate is known by
the network administrator (using a time trend analysis). The default
threshold is 50%.
Set a percentage value for video traffic in the downstream direction. This
is a percentage of the maximum burst size for video traffic. Video traffic
exceeding the defined threshold is dropped and a log message is
generated. Video traffic consumes significant bandwidth, so this value can
be set to a higher value once a general downstream rate is known by the
network administrator (using a time trend analysis). The default threshold
is 25%.
Set a percentage value for voice traffic in the downstream direction. This
is a percentage of the maximum burst size for voice traffic. Voice traffic
exceeding the defined threshold is dropped and a log message is
generated. Voice applications consume significant bandwidth, so this
value can be set to a higher value once a general upstream rate is known
by the network administrator (using a time trend analysis). The default
threshold is 0%. 0% means no early random drops will occur.
OK when completed to update this WLAN's QoS rate limit settings. Select
Configuration > Wireless
Add button to define a new WLAN QoS policy, or select an existing WLAN QoS policy
Edit to modify its existing configuration.
Wireless Client Rate Limiting
> WLAN QoS Policy to display existing QoS policies available to
tab.
settings for each access
Reset to revert the