Motorola AP-6511 Reference Manual page 296

Motorola Solutions AP-6511 Access Point System Reference Guide
9. Define the following
configuration:
Client Identifier
Type
Value
IP Address
Domain Name
9-20
Figure 9-11 Static Bindings Add screen
General parameters required to complete the creation of the static binding
Use the drop-down menu whether the client is using a
Address or Client Identifier
Provide a hardware address or client identifier value to the client to help
differentiate from other client identifiers.
Set the IP address of the client using this host pool.
Provide a domain name of the current interface. Domain names aren't case
sensitive and can contain alphabetic or numeric letters or a hyphen. A fully
qualified domain name (FQDN) consists of a host name plus a domain
name. For example, computername.domain.com
Hardware
as its identifier type.