Motorola AP-6511 Reference Manual page 298

Motorola Solutions AP-6511 Access Point System Reference Guide
14.Select
back to its last saved configuration.
15.Select the
16.The addition or edit of the network pool's advanced settings requires the following
be set:
Boot File
BOOTP Next Server
Enable Unicast
9-22
OK when completed to update the static bindings configuration. Select
Advanced tab to define additional NetBIOS and Dynamic DNS parameters.
Figure 9-12 DHCP Pools screen - Advanced tab
Enter the name of the boot file used with this pool. Boot files (Boot
Protocol) can be used to boot remote systems over the network. BOOTP
messages are encapsulated inside UDP messages so requests and replies
can be forwarded. Each pool can use a different file as needed.
Provide the numerical IP address of the server providing BOOTP resources.
Unicast packets are sent from one location to another location (there's just
one sender, and one receiver). Select this option to forward unicast
messages to just a single device within the network pool.
Reset to revert the screen
General parameters