Motorola AP-6511 Reference Manual page 32

Motorola Solutions AP-6511 Access Point System Reference Guide
Configure VLANs
Manually
Advanced VLAN
Configuration
For the purposes of this example, select
The
interface.
Use the Controller to
assign IP addresses
to devices
IP Address Range
The
interface.
Primary DNS
Secondary DNS
3-8
Select the Configure VLANs Manually checkbox to enable advanced manual
VLAN configuration.
For more information on VLAN configuration see
Configuration on page
Select the Advanced VLAN Configuration button to set associations between
VLANs and physical interfaces.
DHCP Address Assignment
Select the
to enable the DHCP server to provide IP and DNS information to clients on the
LAN interface.
Enter a starting and ending IP Address range to assign to clients on the LAN
interface. It's good practice to avoid assigning IP addresses from
x.x.x.1 - x.x.x.10 and x.x.x.255 as they are often reserved for standard services
on most networks.
Domain Name Server (DNS)
Enter an IP Address for the main Domain Name Server providing DNS services
for the AP-6511 LAN interface.
Enter an IP Address for the backup Domain Name Server providing DNS
services for the AP-6511 LAN interface.
7-11.
Use DHCP and uncheck
section contains configuration for the DHCP server on the LAN
Use the Controller to assign IP addresses to devices
section contains configuration for the DNS server on the LAN
Virtual Interface
Configure VLANs Manually.
checkbox