Motorola AP-6511 Reference Manual page 322

Motorola Solutions AP-6511 Access Point System Reference Guide
Use the
in the Configure events screen.
6. Refer to the following event parameters to assess nature and severity of the displayed event:
Timestamp
Module
Message
Severity
Source
7. Select
11-4
Figure 11-2 Fault Management View Events screen
View Events screen to track and troubleshoot events using source and severity levels defined
Displays the timestamp (time zone specific) when the event or fault occurred.
Displays the module used to track the event. Events detected by other modules
are not tracked.
Displays error or status messages for each event listed.
Displays the severity of the event as defined for tracking from the
Configuration screen. Severity options include:
All Severities – All events are displayed regardless of their severity
Critical – Only critical events are displayed
Error – Only errors are displayed
Warning – Only warnings are displayed
Informational – Only informational events are displayed
Displays the MAC address of the source device tracked by the selected
module.
Clear All to clear the events displayed on this screen and begin a new event data collection.