Table of Contents
Advertisement
9. Click
Apply
to save any changes to the access point Quick Setup screen. Navigating away
from the screen without clicking Apply results in all changes to the screens being lost.
10. Click
Undo Changes
settings displayed on the access point Quick Setup screen to the last saved configuration.
3.4.3.1 Configuring Basic WLAN Security Settings
To configure a basic security policy for a WLAN:
1. From the Quick Setup screen, click the
At a minimum, a basic security scheme (in this case WPA2/CCMP) is recommended in a
network environment where sensitive data is transmitted.
NOTE For information on configuring the other encryption and authentication
2. Ensure the
Name
of the policy.
Multiple WLANs can share the same security policy, so be careful not to name security
policies after specific WLANs or risk defining a WLAN to single policy. Motorola Solutions
recommends naming the policy after the attributes of the authentication or encryption type
selected.
3. Select the
WPA2/CCMP (802.11i)
(if necessary) to undo any changes made. Undo Changes reverts the
options available to the access point, see
page
6-2.
of the security policy entered suits the intended configuration or function
checkbox.
Create
button to the right of the Security Policy item.
Configuring Security Options on
Getting Started
3-15
Advertisement
Table of Contents
