6.15.5
Digital Convergence Window
Use the Digital Convergence window to adjust the red, green, and blue digital micromirror devices (DMD)
electronically. The maximum adjustment you can make is 3 pixels. When you complete a electronic
micromirror adjustment, 1 to 3 pixels are removed from the image.
Do not perform a digital convergence until you manually adjust and set the DMDs. Reset the red, green, and
blue DMD values to their default setting before you manually adjust the DMDs.
Tap Menu > Service Setup > Digital Convergence.
Table 6.37 Digital Convergence Window
Control
Red DMD
Green DMD
Blue DMD
Default
CP2220 User Manual
020-100420-07 Rev.1 (1-2012)
Description
Adjusts the red digital micromirror device.
Adjusts the green digital micromirror device.
Adjusts the blue digital micromirror device.
Returns all digital micromirror devices to the default setting 0:3.
Section 6: Projector Menus
6-55