Rs-232 Only Interface; Rs-232 Standard Factory Settings; Baud Rate - Datalogic Cobalto CO5330 Product Reference Manual

RS-232 Standard Factory Settings

Use the programming bar codes in this chapter if modifications to the standard RS-232
interface settings are necessary to meet your system's requirements. Additional settings
which apply to both the RS-232 and USB interfaces are available in
COM Interfaces
RS-232 Standard Factory Settings
Reference

Baud Rate

Baud rate is the number of bits of data transmitted per second. Set the scanner' s baud rate to
match the baud rate setting of the host device. With an improper baud rate setting, data may
not reach the host correctly.
$CR2BA01
Baud Rate = 2400
$CR2BA03
Baud Rate = 9600
Product Reference Guide

RS-232 ONLY Interface

.
Appendix B, Standard Defaults


Enter/Exit Programming Mode
Chapter 5, RS-232/USB-
for a listing of standard factory settings.
$CR2BA00
Baud Rate = 1200
$CR2BA02
Baud Rate = 4800


19