Codablock F
Codablock F AIM Check
Specifies if Check Digit calculation algorithm is AIM compliant or not.
$CCFAC01
Codablock F AIM Check = AIM compliant
Codablock F Length Control
This feature specifies either variable length decoding or fixed length decoding for the Codablock
F symbology.
Variable Length:
Fixed Length:
DEFAULT
$CCFLC01
Codablock F = Fixed Length
Product Reference Guide
For variable length decoding, a minimum and maximum length may be set.
For fixed length decoding, two different lengths may be set.
Enter/Exit Programming Mode
$CCFAC00
Codablock F AIM Check = Not AIM compliant
DEFAULT
$CCFLC00
Codablock F Length Control = Variable Length
229