Tmaa10-07 Desktop Microphone; Operation; Installation - Tait TM8100 mobiles Service Manual

36

TMAA10-07 Desktop Microphone

grommet
36.1

Operation

36.2

Installation

TM8100/TM8200 Service Manual
© Tait Electronics Limited November 2007
The TMAA10-01 desktop microphone is an
omnidirectional dynamic microphone which can be used
in dispatch situations, where the microphone is positioned
on a flat surface. The desktop microphone plugs into the
microphone socket on the radio control head.
The desktop microphone has an internal pre-amplifier and
LOCK
key
an adjustable output control on the underside of the
desktop microphone base.
TRANSMIT
key
MONITOR
key
Hold down the
MONITOR
If the channel is clear, press the
clearly into the microphone and release the
finished talking.
Note
The
MONITOR
hold the
MONITOR
you. The
MONITOR
Important
The desktop microphone grommet must be installed
whenever the desktop microphone is plugged into the
microphone socket. When installed, the grommet has two
functions:
to prevent damage to the microphone socket when
■
there is movement of the microphone cord, and
to ensure that the control head is sealed against water,
■
dust and other environmental hazards.
1. Plug the microphone cord into the microphone socket on the radio
control head.
key and check whether the channel is clear.
key (PTT) to transmit. Speak
TRANSMIT
TRANSMIT
key can be locked in the 'on' position. To do this,
key down and slide the
key should now be locked on.

TMAA10-07 Desktop Microphone

key when you have
key towards
LOCK
607