Installation - Tait TM8100 mobiles Service Manual

Changing the
Sensitivity of VOX
35.2

Installation

Installing the
Remote
Microphone
Installing the
Remote PTT
(TMAA10-04)
600 TMAA10-04 Remote PTT Kit and TMAA10-05 Hands-Free Kit
In the VOX menu, choose On.
2.
Press Select.
3.
While VOX is on, the VOX indication may be
programmed to appear below the channel infor-
mation on your display.
You may need to change the threshold at which the radio detects your voice
and makes a call. To do this, you use the VOX Sensitivity menu.
1. Select Menu>Radio Settings>
Function Settings>VOX Sensitivity.
2. In the VOX Sensitivity menu, use the scroll keys
or to adjust the VOX sensitivity to the
desired level.
Press Done to save this setting.
3.
Important
Care should be taken to avoid routing any cables near vehi-
cle pedal controls, steering column and other moving parts.
1. Choose one of the three mounting options provided for the remote
microphone and determine its most appropriate location.
The mounting position of the microphone should be no more than
50cm (20 inches) from the user's mouth.
2. Route the remote microphone cable so as not to distract the driver.
3. Mount the remote microphone in the chosen location and check
that the microphone and cable are clear of all the usual movements
performed by the user.
Important
The remote PTT must be operable from a normal
driving position.
1. Secure the remote PTT in position using the velcro strap and plug the
remote PTT cord into the remote PTT extension lead.
A common position for the remote PTT is on the gear lever of
the vehicle.
TM8100/TM8200 Service Manual
© Tait Electronics Limited November 2007