Tait TM8100 mobiles Service Manual page 18

18 Introduction
Control-head user interface and
bc:
hardware options
10 blank control head, no display, 9-pin D-
range connector
20 2-digit-display control head
30 RJ45 control head, two RJ45 connectors
31 RJ45 control head for multi-body, two
RJ45 connectors, RS485
32 RJ45 control head, two RJ45 connectors,
customer-specific product
34 RJ45 control head for dual-head, two
RJ45 connectors, RS485
40 graphical-display control head
42 graphical-display control head
50 1-digit-display control head
60 3-digit-display control head
Note
Product codes not listed here identify control-head configurations
of the digital TM9100 product line.
Badging and
dd
configuration variants
0T Tait, TM8105
0A Auriga
0T Tait, TM8115
OE ECG, TM8115
AT Tait, Auriga (dual badge)
0T Tait, TM8252
0T Tait, TM8200
1T Tait, TM8200, termination
resistor in
2T Tait, TM8200, termination
resistor out
0T Tait, TM8124
0T Tait, TM8200
0T Tait, TM8200
0E ECG, TM8200
1T Tait, TM8200, yellow
2T Tait, TM8200, green
1T Tait, TM8200, yellow
2T Tait, TM8200, green
0T Tait, TM8110
AT Tait, Auriga (dual badge)
0T Tait TM8235
TM8100/TM8200 Service Manual
© Tait Electronics Limited November 2007