Faulty Radio Mute - Tait TM8100 mobiles Service Manual

10.5

Faulty Radio Mute

Introduction
Task 14 —
Determine Type of
Muting Selected
262 Receiver Fault Finding
If the radio mute is faulty, the calibration settings are suspect. There are three
tasks:
Task 14: determine type of muting selected
■
Task 15: noise muting selected
■
Task 16: RSSI muting selected
■
The programming application is required for
application for Task 15
First use the programming application to determine the type of muting
selected.
In the programming application click the "Basic Settings" page under
1.
the "Networks" heading.
Click the "Basic Network Settings" tab.
2.
Check the setting in the "Squelch Detect Type" field. Ensure that the
3.
setting is what the Customer expects.
If the setting is "Noise Level", implying that noise muting is selected,
4.
15. If the setting is "Signal Strength", implying that RSSI
go to Task
muting is selected, go to
Task
and Task 16.
Task 16.
© Tait Electronics Limited November 2007
14, and the calibration
TM8100/TM8200 Service Manual