Tait Radio Communications http://www.taitworld.com Corporate Head Office Tait North Asia New Zealand Regional Head Office - Hong Kong Tait Electronics Ltd Tait Mobile Radio (Hong Kong) Ltd P.O. Box 1645 E-mail: hongkong@taitworld.com Christchurch Beijing New Zealand Tait Mobile Radio (Hong Kong) Ltd E-mail: info@taitworld.com...
THIS LICENCE WILL BE TERMINATED EXCLUSIVE RIGHT TO USE THE SOFTWARE OR AUTOMATICALLY AND WITHOUT NOTICE FROM FIRMWARE ON A SINGLE MACHINE PROVIDED TAIT IN THE EVENT THAT THE LICENSEE FAILS TO YOU MAY ONLY COMPLY WITH ANY TERM OR CONDITION OF THIS AGREEMENT...
Page 4
FOR ANY TERMS OF AGREEMENT TO THE CONTRARY DIRECT OR CONSEQUENTIAL DAMAGE ARISING BETWEEN TAIT AND THE LICENSEE THIS IS THE OUT OF OR IN CONNECTION WITH ANY USE OR COMPLETE AND EXCLUSIVE STATEMENT OF THE INABILITY OF USING THE SOFTWARE OR...
Copyright All information contained in this manual is the property of Tait Electronics Ltd. All rights are reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated, stored, or reduced to any electronic medium or machine-readable form, without prior written permission from Tait Electronics Ltd.
MM8100-00-03-804 TM8100 Mobile Radio User’s Guide MM8100-02-00-812 TM8100 Mobile Radio Service Manual All available TM8100 product documentation is provided on the TM8100 Product Support CD, product code TMAA20-01. Updates may also be published on the Tait support website. Publication Record Version Publication Date Description 1.00...
Regulatory Information Any modifications you make to this equipment which are not authorised by Tait Electronics Ltd may invalidate your compliance authority’s approval to operate the equipment. PCB Information All PCBs are identified by a unique 10 digit IPN (internal part number)
TOPA-SV-024 Test Unit The TOPA-SV-024 test unit is used to test and maintain Tait Orca portables (TOP) and TM8100 radios by providing an interface between the radio, a test PC, and an RF communications test set. The diagram below shows the front panel of the test unit.
This 3-way toggle switch is used to switch between Mod Audio (Tait Orca portables only), Mic Audio, and Off (no audio signal). With the Tait Orca portables, this switch can be used for setting up dual point modulation by applying modulation to different parts of the radio.
When set to Speaker, only the speaker of the test unit is active. Tait Orca portables When set to Radio, only the speaker of the Tait Orca portable is active. When set to Load, no speaker is active. The audio signal is terminated in the test unit dummy load.