Verify the
Specifications
Obtain
Replacement
Component
118
General Information
Before ordering the part, make sure that the specifications of the damaged
part are identical to the specifications given in the BOM. It is particularly
important for tolerances to be the same. When the replacement component
arrives, verify specifications again before installing the part.
To determine whether the required component can be ordered as a stand-
alone part, see
"Spare Parts" on page
stand-alone part, order it from your nearest Tait CSO. If the item is available
only as part of a spares kit, check with Tait regarding the availability of the
kit.
455. If the item can be ordered as a
TM8100/TM8200 Service Manual
© Tait Electronics Limited November 2007