Installation Warnings; Warning: Safe Radio Mounting; Warning: Interference With Vehicular Electronics; Warning: Liquefied Petroleum Gas Powered Vehicles - Tait TM8250 User Manual

Warning: Safe radio mounting

I Mount the radio securely so that it will not break loose in
I Mount the radio where it will not interfere with the
I Do not mount the radio vertically, with the control head

Warning: Interference with vehicular electronics

Some vehicular electronic devices may be prone to malfunc-
tion, due to the lack of protection from RF energy present
when your radio is transmitting.
Examples of vehicular electronic devices that may be affected
by RF energy are:
I electronic fuel injection systems
I electronic anti-skid braking systems
I electronic cruise control systems.
If the vehicle contains such equipment, consult the vehicle
manufacturer or dealer in order to determine whether
these electronic circuits will perform normally when the
radio is transmitting.

Warning: Liquefied petroleum gas powered vehicles

Radio installation in vehicles powered by LP (liquefied petro-
leum) gas with the LP gas container in a sealed-off space
within the interior of the vehicle must conform to the
National Fire Protection Association Standard NFPA 58. This
standard states that the radio equipment installation must
meet the following requirements.

30 Installation warnings

Installation warnings
the event of a collision. An unsecured radio is dangerous
to the vehicle occupants.
deployment of passenger air bags.
facing down. This will violate compliance with the Euro-
pean Union standard EN 60950, Safety of Information
Technology Equipment.