Table of Contents
Advertisement
Instruction Manual
Emergency Alarm
GPS
Scan
Accessory State
Lone Worker
Call
Channel Type
10
TM2210 Digital Mobile Radio
enabled, this icon is displayed.
The radio is operating under emergency alarm
mode.
Locationing is successful and data is being received.
GPS function is enabled, but no data can be
received.
When the icon rotates, scanning is in progress.
Scanning stops in the prior channel 1 or 2.
Scanning stops in a conventional channel.
The USB cable is connected.
The function is enabled.
A call is being made.
A call is being received.
An individual call is being made.
A group call is being made.
An all call is being made
TM2210 Digital Mobile Radio
2.4 LED Indicator
State
Red light on
Transmitting signals
Green light on
Receiving signals
A call is received, and the radio is in the duration before
Orange light on
automatic reset (under analogue mode) * or in the duration
before call hangup (under analogue mode).
The radio is in alarm state, or a missed call or call alert is
Orange light flashing
received, or scanning is under progress.
Red light flashing
An emergency alarm is being received, or startup self-test fails.
3.
Installation
Before installing the radio, please read carefully.
Attentions
The radio should be installed in a position where it can be used conveniently and personal
injury can be avoided while driving a vehicle in poor road condition.
Instruction Manual
Description
11
Advertisement
Table of Contents
