Front Decoration Plate Left/Right; Rear Housing - Epson Stylus Photo R1900 Service Manual

EPSON Stylus Photo R1900/R2880/R2000

4.2.3 Front Decoration Plate Left/Right

1. Open the Stacker Assy.
2. While releasing the hook on the Front Decoration Plate Left, open the plate in the
direction of the arrow, and remove it.
3. In the same way, remove the Front Decoration Plate Right.
Figure 4-9. Removing the Front Decoration Plate Left/Right
When installing the Front Decoration Plate L/R, insert the two
hooks at the bottom of them into the holes of the Lower housing,
then secure the Front Decoration Plate L/R with the other hooks.
Hook
Figure 4-10. Reinstalling the Front Decoration Plate Left/Right
Disassembly And Assembly
Hook
Front Decoration Plate Left
Removing the Housings

4.2.4 Rear Housing

1. Remove the two C.B.P. M3 x 10 screws and the C.B.S. M3 x 6 screw that secure
the Rear Housing.
2. Disengage the two tabs from the Upper Housing and remove the Rear Housing.
Tab
2) C.B.S. M3x6
Figure 4-11. Removing the Rear Housing
Revision E
1) C.B.P. M3x10
Rear Housing
Confidential
Tab
77