Flag Release Assy - Epson Stylus Photo R1900 Service Manual

EPSON Stylus Photo R1900/R2880/R2000

4.4.17 FLAG Release Assy

1. Remove the APG Assy. (p.89).
2. Remove the Release Holder Assy. (p.125)
3. Remove the guide pin on the Driven Release Holder from the Main Frame using
tweezers, and slide the Driven Release Holder to the left as viewed from the front
of the Printer Mechanism.
In the following procedure, Parallel Pin 1.5 may drop off when the
C A U T I O N
Driven Release Holder is slid. Be careful not to lose it.
Parallel Pin 1.5
Figure 4-150. Parallel Pin 1.5
Disassembly And Assembly
4. Release the three tabs on the Driven Release Holder from the Main Frame, and
remove the FLAG Release Assy.
Front
Rear
FLAG Release Assy
Disassembling the Printer Mechanism
Front
Tabs
Guide pin
Driven Release Holder
Tabs
Guide pin
Figure 4-151. Removing the FLAG Release Assy
Revision E
Tab
126
Confidential