Carriage Shaft / Carriage Unit - Epson Stylus Photo R1900 Service Manual

EPSON Stylus Photo R1900/R2880/R2000
 Attach the Label, Ink Position;B at the position in the figure
below.
Figure 4-66. Attaching the Label, Ink Position;B
After replacing the Printer Mechanism, always make the required
A D J U S T M E N T
R E Q U I R E D
adjustments referring to the following.
 "Chapter 5
Adjustment
Disassembly And Assembly
6mm
2mm
Label, Ink Position;B
(p.137)"
Disassembling the Printer Mechanism

4.4.5 Carriage Shaft / Carriage Unit

1. Remove the Printhead / CSIC Assy. (p.92)
2. Remove the CR Scale. (p.90)
3. Remove the LED Board. (p.86)
4. Remove the APG Assy. (p.89)
5. Rotate the PG Cam (Right) to adjust its positions other than PG++ downside.
Figure 4-67. Adjusting the PG Cam
Revision E
PG Cam (Right)
98
Confidential