Epson Stylus Photo R1900 Service Manual page 36

EPSON Stylus Photo R1900/R2880/R2000
LED Indications
Error Status
Power
Ink-out error
-
No ink cartridge/
-
CSIC error
Flashes
Maintenance request
Off
alternately 1
Flashes at
Fatal error
Off
high speed
Note *1: Stylus Photo R2880 only.
*2: The cartridge LED corresponding to each ink cartridge lights.
*3: The "XXXX" represents the part number of the Ink Cartridge.
Refer to "1.2.2 Ink Cartridge"
Note : --: No change
Flash: Repeats turning On and Off every 1.25 seconds.
Flash 2: Repeats On for 0.5 seconds, Off for 0.5 seconds,
On for 0.5 seconds, and Off for 1.0 second.
Flash at high speed: Repeats turning On and Off every 0.5 seconds.
Flashes alternately 1: Same as the "Flash"
Flashes alternately 2: Repeats turning Off and On every 1.25 seconds.
Troubleshooting
Table 3-1. List of Error Messages
Paper Ink
Replace Cartridge
2
*
Black: XXXX
Color: XXXX
2
- Light*
...................
Epson recommends the genuine Epson cartridges listed above. Click the
How to button for ink cartridge replacement instructions.
Ink cartridges cannot be recognized
2
*
Black: XXXX
Color: XXXX
2
- Light*
...................
Epson recommends the genuine Epson cartridges listed above. Click the
How to button for ink cartridge installation instructions.
Service required
Flashes
Parts inside your printer are at the end of their service life. See your printer
alternately 2
documentation.
General error
Flashes at
Delete all print jobs and turn the printer off. Remove any foreign objects
high speed
from inside the printer. After a few minutes, turn the printer back on.
(p11).
STM3 Message
Overview
See the table for Troubleshooting
Refer to Table 3-12 "Troubleshooting of No Ink
Cartridge/CSIC Error" (P.49)
Refer to Table 3-13 "Troubleshooting of Maintenance
Request" (P.50)
Refer to Table 3-14 "Troubleshooting of Fatal Error"
(P.51)
Confidential
Revision E
36