Priority - Epson Stylus Photo R1900 Service Manual

Stylus Photo R1900/R2880/R2000
Table 8-14.
Indicators (LEDs) Function
Printer Status
Power
Power OFF Flashes at
high speed
Fatal Error OFF
Maintenance request OFF
CDR guide error --
Paper path error --
Paper (CDR) jam --
Cover open error --
Multi-feed error --
No paper error --
CDR tray error --
During Ink scrambling sequence Flashes 3
Ink cartridge replacement is in Flashes
progress
Ink sequence is in progress Flashes
CSIC error --
No ink cartridge or ink-out error --
Ink Color error --
Note *1: When two or more errors occur at the same time, the one with higher priority will be indicated.
*2: The cartridge LED corresponding to each ink cartridge lights.
*3: NW sheet LED and Wi-Fi LED don't depend on the priority of other LEDs.
*4: After the setting succeeds, LED is turned on for 5 minutes, and turned off.
(Conformed to Display specification of WPS formula)
Note : -- : No change
Flash: Repeats turning On and Off every 1.25 seconds.
Flash 2: Repeats On for 0.5 seconds, Off for 0.5 seconds,
On for 0.5 seconds, and Off for 1.0 second.
Flash 3: Repeats Off for 0.5 seconds, On for 0.5 seconds,
Off for 0.5 seconds, and On for 1.0 second.
Flash 4: Repeats On for 2.0 seconds and Off for 0.5 seconds.
Flash at high speed: Repeats turning On and Off every 0.5 seconds.
Flashes alternately 1: Same as the "Flash"
Flashes alternately 2: Repeats turning Off and On every 1.25 seconds.
Stylus Photo R2000
Indicators (LEDs)
NW
Paper Ink Wi-FI
sheet
OFF OFF -- --
Flashes at Flashes at -- --
high speed high speed
Flashes Flashes -- --
alternately alter nately
1 2
Flashes 2 Flashes at -- --
high speed
Flashes -- -- --
Flashes -- -- --
Flashes -- -- --
ON -- -- --
ON -- -- --
ON -- -- --
-- -- -- --
-- -- -- --
-- -- -- --
-- ON * 2 -- --
-- ON * 2 -- --
-- Flashes at -- --
high speed
2
*
Table 8-14.
Pri-
Printer Status
ority
1
*
Data processing / Printing from
1
camera
Access point setting error
2
(Security key exchange)
Access point setting error (General)
Access point setting error
3
(Registration)
Access point setting error
4
(PINCODE authentication)
Success Wireless LAN setting
Cannot set Wireless LAN
5
During push-button setting
6
During PINCODE setting
7
During receiving data
8
Network initialization start
9
(LED ON)
Network initialization start
10
(LED OFF)
State of initialization start
11
Non connection
During Wireless LAN connection
(having IP)
During Wired LAN connection
(having IP)
Non support device connection
non compliant Hub
Ink low
During camera connection
(Head rubbing reduction ON)
During camera connection
(Head rubbing reduction OFF)
During Power ON sequence
Features
Indicators (LEDs) Function
Indicators (LEDs)
NW
Power Paper Ink
sheet
Flashes -- -- --
-- -- -- --
-- -- -- --
-- -- -- --
-- -- -- --
-- -- -- --
-- -- -- --
-- -- -- Flashes
alternately
2
-- -- -- Flashes
simultaneo
usly
Flashes -- -- Flashes
-- -- -- ON
-- -- -- OFF
-- -- -- Flashes
alternately
2
-- -- -- OFF
-- -- -- ON
-- -- -- OFF
-- Flashes2 Flashes3
-- Flashes 4 Flashes
2
-- -- Flashes*
Flashes 4 -- --
Flashes 2 -- --
Flashes -- --
Revision E
Pri-
ority
Wi-FI
1
*
--
Flashes at
high speed
Flashes
Flashes
Flashes
4
ON *
Flashes
Flashes
alsternatel
y1
Flashes
3
12*
simultaneo
usly
--
ON
OFF
Flashes
alternately
1
--
--
ON
13
14
15
16
181
Confidential