Operation Buttons & Leds Functions - Epson Stylus Photo R1900 Service Manual

EPSON Stylus Photo R1900/R2880/R2000
1.5.3 Operation Buttons & LEDs Functions
Detailed information on the buttons and LEDs functions are listed below.
Table 1-17. Operation Button Functions
Printer
Button
Status
Off • Turns the power on.
Power
On • Turns the power off.
• Runs a sequence of ink cartridge replacement. The
carriage moves to set the ink cartridge to the position
for replacement.
Ink On
• When an ink cartridge has been set in the ink replacement
position, moves the carriage to the home position.
• Feeds or ejects paper.*
• Recovers from a multi-feed error and feeds paper to
restart the print job.
• Feeds paper when paper is loaded after a no-paper
error occurs.
• Ejects a jammed paper when a paper jam error occurs.
On
• Cancels the print job during printing.
Paper
• Runs a sequence of ink cartridge replacement when
an ink-out, or ink color error*
moves to set the ink cartridge to the position for
replacement.
• When an ink cartridge has been set in the ink replacement
position, moves the carriage to the home position.
• Recovers from a paper jam error.
During CDR
printing
• Cancels the print job during printing.
• Runs a head cleaning.
Ink
• Runs a sequence of ink cartridge replacement when
(when held for three On
ink level low, ink out, no ink cartridge, or ink color
seconds or longer)
error*
• Feeds the roll paper to the cutting position and prints
a cutting line.
• Returns the cutting position.
Roll Paper On
• When an ink cartridge has been set in the ink
replacement position, moves the carriage to the home
position.
Product Description
Function
1
2
occurs. The carriage
2
has occurred.
Operation Buttons & Indicators (LEDs)
Table 1-17. Operation Button Functions
Printer
Button
Status
• Ejects the paper backwards out of the printer.
Roll Paper
• When an ink cartridge has been set in the ink
(when held for three On
replacement position, moves the carriage to the home
seconds or longer)
position.
2
Power + Ink * • Turns the power on in rub reduction mode when
At power on
(combination) connected to DSC (digital still camera).
2
Power + Ink * • Forcefully turns the power off.
(combination)
On
(Hold down the Ink
button for 7 sec or
longer)
1
Power + Paper * • Prints a nozzle check pattern*
At power on
(combination) the PC.*
Note 1: The paper cannot be fed or ejected if the CDR Tray Base is open.
2: Stylus Photo R2880 only.
3: The nozzle check pattern printed by the printer is shown in
Revision E
Function
2
when not connected to
3
Figure 1-5 and Figure 1-6.
Confidential
24