Epson Stylus Photo R1900 Service Manual page 189

Stylus Photo R1900/R2880/R2000
3. Disconnect the Wireless LAN Board cable, and remove the Wireless LAN
Board Assy.
Wireless LAN
Board Cable
Figure 8-14. Remove the Wireless LAN Board Assy (3)
 Refer to
Figure 8-12
 Don't forget to secure the earth cable of the PictBridge
Holder while securing the earth cable of the Wireless
LAN Board.
Stylus Photo R2000
CN2
for routing the cables.
 Board Assy (Main Board / Power Supply Board)
 For disassembling the Board Assy, please refer to
(Main Board/Power Supply Board) (p84)"
 Describes the Connector Layout of the Main Board to the following.
Table 8-15. Main Board Connector
No. Connector
CN1 PictBridge
CN4 Panel Board, CDR Sensor, Cover
Open Sensor
CN5 Relay FFC (for sensor)
CN6 LED Board
CN9 Ink Mark Sensor, CR Encoder
Sensor, PW Sensor
CN11 Head FFC
CN12 Head FFC
CN13 Head FFC
CN2 Wireless LAN Board
CN119
CN115
CN117
CN13
CN14
CN9
CN22
Disassembly
Revision E
"4.3.1 Board Assy
.
No. Connector
CN14 Head FFC
CN22 CSIC
CN25 High Voltage Module
CN115 CR Motor
CN116 PF Motor
CN117 Pump Motor
CN118 APG Motor
CN119 ASF Motor
--- ---
CN1
CN116
CN118
CN5
CN6
CN2
CN4
CN11
CN12
CN25
Confidential
189