Section 4: Adjusting the Image
4.12.2 Use an Anamorphic Lens
The standard zoom lens on the projector can display flat images because the native resolution and format of the
projector closely match the flat aspect ratio. The installation of an optional anamorphic lens requires that the
source material is resized to fill the digital micromirror device (DMD) and the pixels are horizontally stretched
so that the full 2.39 image width appears on-screen.
Figure 4-10 Using Anamorphic Lens to Achieve "Scope" for Large Screens
4.12.3 Use a Wide Converter Lens
The optional Wide Converter Lens (WCL) magnifies a flat image with a format of 1.85:1 to a scope image with
a 2.39:1 format, while maintaining the full resolution of the source material.
Figure 4-11 Using Wide Converter Lens to Achieve "Scope" with No Resizing
4-14
CP2210 User Manual
020-100410-07 Rev. 1 (01-2012)