Christie CP 2210 User Manual page 149

3D Frame Rate Multiple (TFR)
Setup frame rate multiple for 3D control
SUBCODE DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101 - 164.
Cxxx
Select 3D frame rate for the current channel.
NONE
EXAMPLES:
(TFR?L) List all entries on the frame rate multiple factor
(TFR+C101 3) Set frame rate multiple to "4:2" on channel 101
(TFR+C101?) Get frame rate multiple on channel 101
Get Certificates (TIG)
Gets the LD or ICP certificate.
SUBCODE DESCRIPTION OF USE
Retrieve LD Certificate
ENGC
Retrieve ICP Certificate
ICPC
EXAMPLES:
(TIG+ENGC?) Gets the LD certificate
(TIG+ICPC?) Gets the ICP certificate
3D Input Reference (TIR)
Setup the Input Reference for 3D control.
SUBCODE DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101-164.
Cxxx
Select input reference for the current channel.
NONE
EXAMPLES:
(TDK+C101 "Use GPI (polarity=true)") set Input Reference to 'Use GPI (polarity=true)' on channel 101
(TDK+C101?) get Input Reference for channel 101
Time/Date (TMD)
Set/get the time, date and time zone.
SUBCODE DESCRIPTION OF USE
Get the date in the form yyyy/mm/dd. Read-only.
DATE
Set/get the daylight savings time adjust value.
DSTA
Set/get the local time in the form hh:mm:ss. Ready only.
TIME
Set Time Offset in seconds (± 900 seconds). Must be powered ON. (Write-only)
TOFF
Set/get the time zone
ZONE
CP2210 User Manual
020-100410-07 Rev. 1 (01-2012)
Appendix A: Serial API Commands
A-23