Connecting Rp And Line Card Cables - Cisco 12404 Installation And Configuration Manual

Connecting RP and Line Card Cables

Connecting RP and Line Card Cables

Step 1
Figure 3-5 RP and Line Card Cable-Management Brackets
Step 2
Step 3
Step 4
Step 5
Cisco 12404 Internet Router Installation and Configuration Guide
3-11
To connect RP and line card cables to the router
Attach an ESD-preventive strap to yourself and to either the chassis, or to a bare
metal surface.
Velcro
strap
Proceeding from left to right identify the network interface cables (NIC) that
attach to the RP or line card. See
Carefully route the identified NIC through the cable-management tray and over to
the card interface port; do this for one NIC at a time.
Proceeding from left to right identify the NIC that connects to each card port and
connect the NIC to the RP or line card port.
Proceeding from left to right carefully wrap the NIC using the velcro straps.
Chapter 3
Line card
cable management
bracket
Network
interface
cables
Figure 3-5.
Installing the Cisco 12404 Internet Router
(Figure 3-5):
OL-11636-01