Connecting Rp And Line Card Cables - Cisco 12406 Installation And Configuration Manual

Chapter 3 Installing the Router
Note

Connecting RP and Line Card Cables

Step 1
Step 2
OL-11497-03
Figure 3-6 Crimping the Lug
1
2
1
Place ground wire in the lug
The three threaded inserts that make up the grounding receptacle are set in a
triangle so that you can choose any two of the three holes to attach the lug and
grounding cable.
To connect RP and line card cables, see
Attach an ESD-preventive strap to your wrist and connect the leash to the chassis
or to another grounded, bare metal surface.
Proceeding from left to right, identify the cables that attach to the first RP or line
card.
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide

Connecting RP and Line Card Cables

2
Crimp the lug
Figure 3-7 and follow these steps:
3-11