Installing The Cisco Asr 902 Router; Prerequisites; Installing The Router In A Rack - Cisco ASR 902U Hardware Installation Manual

Installing the Cisco ASR 902 Router

This chapter describes how to install the Cisco ASR 902 Router.
•
•
•
•
•
•
•
•

Prerequisites

Before installing the Cisco ASR 902 Router, it is important to prepare for the installation by:
• Preparing the site (site planning) and reviewing the installation plans or method of procedures (MOP).
• Unpacking and inspecting the Cisco ASR 902 Router.
• Gathering the tools and test equipment required to properly install the Cisco ASR 902 Router.
For more instructions on how to prepare for the installation of the Cisco ASR 902 Router, see
Installation, on page

Installing the Router in a Rack

The following sections describe how to install the Cisco ASR 902 Router in a rack. The procedures in this
section apply to both horizontal and vertical mounting of the router in a rack:
Prerequisites, page 65
Installing the Router in a Rack, page 65
Installing the Chassis Ground Connection, page 71
Installing the Fan Tray, page 74
RSP Installation, page 77
Interface Module Installation, page 79
Installing the Power Supply, page 82
Connecting a Cisco ASR 902 Router to the Network, page 95
39.
Cisco ASR 902 and ASR 902U Aggregation Services Router Hardware Installation Guide
3
C H A P T E R
Preparing for
65