Installing Optional Air Baffles On The Cisco Asr 9006 Router - Cisco ASR 9000 Series Installation Manual

Unpacking and Installing the Chassis
Step 4
Attach the left plastic corner piece to the mounting bracket at the front upper left corner of the chassis
146: Installing Plastic Chassis Corners on the Cisco ASR 9006 Router (Optional Accessories Installation),
on page
Step 5
Attach the right plastic corner piece to the mounting bracket at the front upper right corner of the chassis.
Figure 146: Installing Plastic Chassis Corners on the Cisco ASR 9006 Router (Optional Accessories Installation)
1
After the chassis has been installed in the rack and all chassis accessories have been attached, you can install
the fan trays, power supply modules, and RSP and line cards. See Installing Cards and Modules in the Chassis
in the book Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide for detailed
installation instructions.

Installing Optional Air Baffles on the Cisco ASR 9006 Router

The Cisco ASR 9006 Router has an optional air baffle accessory kit (800-43858-01) for mounting the router
chassis in a 2-post or 4-post 19-inch rack. The accessory kit includes:
• One plenum with two pre-installed front rack-mounting brackets for attaching plenum to front side of
• One support bracket
• One plastic glide strip
• Two rear rack-mounting brackets for attaching plenum to rear side of rack-post
• Twelve 12-24 x 0.5 in. pan-head screws (six for attaching support bracket to chassis and six for securing
• Twelve 8-32 x 0.5 in. pan-head screws for attaching rear rack-mounting brackets on plenum
137).
Plastic chassis corner
piece attaches to metal
bracket at upper left
corner of chassis
rack-post
chassis to rack-mounted plenum)
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Installing Optional Air Baffles on the Cisco ASR 9006 Router
2 Plastic chassis corner
piece attaches to metal
bracket at upper right
corner of chassis
(Figure
137