Advertisement
Installing the Cisco NCS 4216
Installing the Chassis Ground Connection
Figure 15: Installing the Patch Panel on the Rack
Installing the Chassis Ground Connection
Before you connect the power or turn on the power to the Cisco NCS 4216, you must provide an adequate
chassis ground (earth) connection to your router.
This section describes how to ground the Cisco NCS 4216 chassis. The router provides two locations for
attaching a 2-hole grounding lug according to the rack-mounting brackets you use to install the router.
Note
When installing the unit, assemble grounding lug using screw and serrated washer provided along with Kit
NCS4216-DOOR.
Installing the Cisco NCS 4216
17
Advertisement
