Installing The Chassis Ground Connection - Cisco NCS 4216 Installing Instruction

Installing the Chassis Ground Connection

DETAILED STEPS
Step 1 Assemble the patch panels on the opposite side of the rack to make the cable routing process easy.
Step 2 Fix one patch panel with a minimum of two screws on each side.
Figure 5: Installing the Patch Panel on the Rack
Installing the Chassis Ground Connection
Before you connect the power or turn on the power to the Cisco NCS 4216, you must provide an adequate
chassis ground (earth) connection to your router.
Cisco NCS 4216 Hardware Installation Guide
12
Installing the Cisco NCS 4216