Replacement 37 SPUR ASSEMBLY (PL7.1.1)
Described below is the removal procedure common between the left and right sides of the
SPUR ASSEMBLY.
1)
Replace the SPUR ASSEMBLY to the printer by mating the two holes on the SPUR ASSEM-
BLY with the bosses on the printer.
2)
Secure the SPUR ASSEMBLY to the printer with the one screw (silver, with flange, tap,
8mm).
Go to the next replacement step:
Replacement 38 FUSER (PL6.1.10)
Version 2 2006.03.31
Chapter 3 Removal and Replacement Procedures (RRPs)
2)
1)
3 - 141
Kmy03071KA