Replacement 16 TOP COVER (PL1.1.1)
1)
Mate the left side boss of the TOP COVER with the hole of the printer, set the TOP COVER to
the printer.
2)
Mate the holes of the TOP COVER with the left and right bosses of the printer, attach the
TOP COVER.
3)
Fix the TOP COVER to the printer with the four screws (silver, tap, 10mm) and the one screw
(silver, with flange, 10mm).
Go to the next replacement step:
Replacement 24 LEFT COVER (PL1.1.7)
Version 3 2007.03.15
3)
3)
1)-2
2)
Chapter 3 Removal and Replacement Procedures (RRPs)
3)
3)
1)-1
3 - 99
3)
2)
Kmy03103KC