Dell 3110cn Service Manual page 371

Replacement 14 HIGH VOLTAGE POWER SUPPLY (PL5.1.17)
5) Route the harness of the HIGH VOLTAGE POWER SUPPLY to the printer and pass the con-
nector into the hole on the SHIELD MCU.
6) Engage the connector (J16) of the HIGH VOLTAGE POWER SUPPLY to the connector (P16)
of the MACHINE CONTROL UNIT.
Go to the next replacement step:
Replacement 15 FAN (PL9.1.10)
Version 2 2006.03.31
Chapter 3 Removal and Replacement Procedures (RRPs)
6)
3 - 97
5)
Kmy03106KB