Replacement 34 REAR COVER (PL1.1.4)
2)
2)
1)
Replace the REAR COVER by mating the six bosses on the REAR COVER with the holes on
the printer, the RIGHT COVER (PL1.1.6), and the LEFT COVER (PL1.1.7).
2)
Secure the REAR COVER to the printer using the two screws (silver, tap, 10mm) and the two
screws (silver, with flange, 8mm).
Go to the next replacement step:
Replacement 38 FUSER (PL6.1.10)
Version 2 2006.03.31
Chapter 3 Removal and Replacement Procedures (RRPs)
2)
2)
3 - 135
1)
Kmy03074KA