Replacement 41 DUPLEX MODULE (PL11.1.1)
Remove the DUP CONNECTOR CAP (PL1.2.38) of the connector of the FRONT COVER
when installing new DUPLEX MODULE.
1)
Replace the DUPLEX MODULE slowly by mating the two backside bosses of the DUPLEX
MODULE with the holes on the FRONT COVER, and then secure with the lever.
Go to the next replacement step:
Replacement 42 TRANSFER BELT (PL4.1.1)
Version 3 2007.03.15
1)-2
1)-1
NOTE
3 - 145
Chapter 3 Removal and Replacement Procedures (RRPs)
1)-1
Kmy03067KB