Dell 3110cn Service Manual page 294

Removal 11 OPERATOR PANEL (PL1.2.97)
12) Remove the SPRING LATCH (PL1.2.3) from the hooks on the PLATE LATCH (PL1.2.2) and
the FRONT COVER.
13) Remove two screws (silver, with flange, tap, 10mm) that fix the left and right sides of the
LATCH FRONT (PL1.24) to the FRONT COVER.
14) Slide the PLATE LATCH and LATCH FRONT to the left, and then remove the PLATE
LATCH and LATCH FRONT from the FRONT COVER.
15) Remove the four screws (silver, tap, 8mm) that fix the COVER HARNESS (PL1.2.5) to the
FRONT COVER.
Take care not to move the COVER HARNESS away from the FRONT COVER too far
because the COVER HARNESS is secured to the HARNESS ASSY FRONT COVER.
16) Remove the COVER HARNESS from the FRONT COVER.
17) Remove the HARNESS ASSY OPEPANE from the FRONT COVER.
Version 3 2007.03.15
15)
15)
15)
16)
15)
Chapter 3 Removal and Replacement Procedures (RRPs)
12)
13)
17)
3 - 20
14)
13)
Kmy03123KD