Removal 14 MPF FEED SOLENOID (PL3.1.98)
When performing the step below, leave the junction connector on the printer side
cable.
7)
Disengage the connector (P/J256) of the MPF FEED SOLENOID (PL3.1.3).
8)
Remove the harness of the MPF FEED SOLENOID from the DUCT MSI SOL (PL3.1.2) and
DUCT DRV PH (PL8.1.8).
9)
Remove the one screw (silver, tap, 8mm) that fixes the MPF FEED SOLENOID to the printer.
10) Remove the MPF FEED SOLENOID from the printer.
Version 3 2007.03.15
Chapter 3 Removal and Replacement Procedures (RRPs)
8)
9)
10)
3 - 25
7)-1
7)-2
Kmy03018KA